DIY USB cable kit

  • Sale
  • Regular price ¥1,298
tax included Delivery feeIs calculated during the purchase process。


We have made the necessary parts for your own USB cable into a kit, so you can purchase the necessary parts for your own USB cable with this kit. Would you like to challenge yourself?んか?

USB cable*

Supports USB 2.0 standard、UL813 compliant。
100% shielding Aluminum tape shield。
Signal wire conductor is unplated annealed copper wire AWG287 / 0.12mm Signal wire color is green and whiteは緑&白。
Power line conductor is unplated annealed copper wire AWG267 / 0.12mm Signal line color is red and blackは赤&黒。
The drain wireUnplated annealed copper wire AWG26 (1 / 0.4mm)

Paracord*

Paracord is a Type 3 cord made in the United States that covers the cable wire.。
Take the nylon in the center and pass it through the USB cableい。
When passing through a USB cable, the diameter becomes wider and shorter, so 1.2 times倍degreeI will bundle the length of。

HereclickAnd see the paracord color chartい。

Techflex *

Techflex is a type of double-sleeve material that covers the paracord. Techflex creates durability, rigidity and a new style for cables.します。
When passing through a USB cable, the diameter will expand and become shorter.で1.2 timesApproximate length will be included。

HereclickAnd see the Techflex color chartい。

Detachable Aviator or Mini XLR orr WEIPU SA12

The painted removable connector is a circular GX16 5-pin male-female connector that complies with aviation standards to add originality to the USB cable.ます。

HereclickAnd see the detachable aviator color chartい。

Detachable Aviator Ring

This is the connector part of the detachable aviator.。
デタッチャブル アビエーター リング

HereclickAnd see the detachable aviator color chartい。

Heat shrink*

Heat shrink is a heat compression tube used around the connector and in the detachable aviator to secure the cable.す。
The heat shrink used in EXME CABLES is ShrinkFlex 31 polyolefin heat shrink tube with shrink ratio of 31. Diameter is 1/2 "about 1.27cm. Shrink temperature is 90C.温度は90°C。
4 tubes cut to a length of 4 cm are sold.。
Use a heat gun dryer or torch with a suitable attachment, etc. Be careful when heating下さい。

HereclickAnd see the heat shrink color chartい。

connector*

The USB 2.0 connector is used to supply and transfer data between the host computer and the device keyboard用されます。
One for each host and device will be included.ます。

*Regarding wiring, we have prepared a wiring guide.HerePlease see。
*Since it is a DIY kit, soldering and heat work are required. In addition to the kit, solder and tools are required for assembly.です。